MICC Tools
Bending Levers
MICC Cable can normally be bent by hand, but to assist in the symmetry of multiple bends on large installations or where the heavy cables are involved, bending levers can save time.
Stripper (MINI)
Used to strip the sheath of the copper sheathed MI Cable.
Suitable for cables below 9mm diameter.
Stripper (BIG)
Used to strip the sheath of the copper sheathed MI Cable.
Suitable for cables over 9mm diameter.
Pot Wrench
This tool ensures quick and accurate screwing on of the brass pot and is used in conjunction with the appropriate RGM cable gland.
Ringer
When using side cutters or a stripping rod to strip the cable sheath, the ringing tool is used to score a light groove around the cable sheath to neatly finish the stripping action.
Straightener
Designed to assist in the preliminary dressing of cables prior to fixing. The small tool is suitable for cables up to approximately 12.7mm diameter.
Crimping Tool
The MICC Crimp is a robust long life tool that applies a three point crimping action to the brass pot seal, securely locking the cap into position.
+86 13315975815
inquiry@htlcable.com